Back to the wall toilet in the UK – key factors explored


Back to the wall toilet in the UK – key factors explored

Why don’t you see the toilet in the middle of the bathroom, even in a huge mansion? In addition to the apparent fact that most people want a little secrecy during certain things, it requires logistics that are worth no time and resources to adjust. For beginners who wish to install a half or 3/4 bathroom, it would be good to provide x-rays since there is more happening beneath the floor and behind the walls than in the bathroom. However, back to the wall toilet will be the best and most convenient options among all in the market. 

Scan the variables

  1. Position: There’s a regular half bath with a vanity and a toilet next to each other. The plumbing, which includes water supply lines, sewage lines, and ventilation lines, is integrated. The toilet, which is rough in plumbing, should have a length of twelve” from the walls to the central drain, known as a “closet bend” (closed bend). The wall is 6″ high instead of 3 1⁄2 inches to accommodate plumbing, drainage or ventilation, and supply lines. This happens because it is more comprehensive than a standard wall.
  2. Material: These different items for back to wall toilet can be made from cast iron, cpvc, PVC, or other material that has been newly produced. 

Why connect the toilet with the wall?

The new toilets should be kept close to the wall for many reasons. One explanation is that plumbing parts are designed for the installation of regular code. That is not to assume that the drainage system cannot be added or amended, but the cost will increase if you leave traditional installation procedures. 

Another explanation of why wall closeness is maintained with the most standard toilets is the two-piece composed of the bowel and the tank. The proximity to the wall makes installing the standard simpler, reduces the duration and costs of installation, and protects the toilet from breakage.

Consider the issues of wall tiling before installation 

A tile that is broken or chipped? It is very easy to replace if you have the same tile. Break the old grout off, naturally, with a sharp knife. Put a cloth over the tile and strike it softly at different spots with a hammer before it breaks off. Remove any cold chisel or tiny bolster tile pieces. If you have the skill, ensure that all old adhesive is chipped away, and the surface of the new tile is as smooth as possible. 

Apply adhesive on the new tile back. If there is a smooth back without ridges, build your ridges by drawing something like a regular gap through it. This makes moving to the wall easier. Drill it softly and allow the replacement adhesive to drain from the joints. A floating rubber is suitable for spreading and working the grout into the gaps through tiles. Do small areas to make it easy to wash away any waste until it absorbs too much. With clean water and a sponge, you can wipe the tile surface clean it regularly.

Back to wall toilet range at the Royal bathrooms 

It would help if you had an efficient bathroom with the above solutions – with the little details you want to make it attractive now. Use wide ceramic tiles for the walls since they help build a sense of space. A large mirror with good lights would do the same. Although obviously, your decision on taps should match and blend into the whole bathroom design. The ceramic tiles you used on the walls can continue for the floor or choose rugs or carpets. However, the trend at the day is tiling on the floor. If you have the budget, you can consider a heated floor. 

Many bathroom companies will help with your decisions using the tools for bathroom design, enabling you to model your bathroom on a computer before purchasing the equipment. Get it equipped with the back to wall toilet now!

our new article topic Things To Do In Burlington Vt

Related Articles

Leave a Comment